At the end of the build or major renovation project, you’ll need to get the house certified so that it can eventually be sold on. Here’s what you need to know.

In this article we cover:

  • Certification for completed work
  • Certification of products and materials
  • Can you certify a house retrospectively?
  • How to keep track during the build or renovation project

Whether you plan to sell the house or just want to have your due diligence done, here’s how to get your ducks in a row at the very end of your new build or extension project.

At the end of a building project, the self-builder should have obtained certification for all elements of the works carried out. Whilst certification for the construction project is provided by your design professional (the certifier), these should not be confused with certificates of compliance which provide evidence that products and materials are suitable for their intended use.

These compliance certificates will need to be provided to the certifier, the warranty provider and to building control.

A supplier’s receipt with a clear and accurate description of the materials may well suffice for basic products, but complex and safety-critical items will require certificates from the manufacturers or a suitable approved third-party organisation.

In addition to certification of products and materials, there will be work which needs to be certified, such as the installation and testing of electrical, heating, cooling and ventilation systems.

If you engage a contractor to manage all of the works, then they should provide all of the documentation for the completion stage. If you purchase materials yourself, you need to obtain the relevant paperwork; or if you engage subcontractors to complete the various stages, then you will need to take responsibility for record keeping.

Either way, at the end of the project, you should have a project file that contains all of the documentation needed to allow the final certificates to be provided.

In ROI building projects, the Assigned Certifier and the builder sign the Certificate of Compliance on Completion, supported by Ancillary Certificates from other members of the design team and by certificates from specialist subcontractors. This makes the process relatively simple, but many self-builders choose to opt-out of this formal building control and certification procedure.

The following lists contain processes, materials and products for which you should keep certificates of compliance. Not all will be asked for by building control or your certifier, but you may choose to keep them to show that everything important was obtained and implemented in accordance with the specifications and regulations. Your evidence file can be physical or digital or both.

Obtain product certification from your supplier whenever purchases are made. If you cannot find a reference to something on your working drawings that you think you might need, then ask your design professional for advice.

Be aware that a product might have the correct markings (e.g BS Kitemark or EC stamp) and be supplied with certification but you need to make sure that the compliance covers the intended use of the product. For example, a box of wall ties should carry marks of approval, but are wire ties being used across a 200mm cavity where their design rating restricts their use to a maximum 150mm wide cavity? Or are you using CE or kite-marked pipes as sewer pipes when their certification is only for use as ductwork? I specifically mention these issues because they keep cropping up.

Certification for completed work

Completion and commissioning certificates need to be obtained from all subcontractors (who must have the appropriate valid licences, permits and insurances) for specialist works. These would normally include installation, testing and commissioning of works such as:

  • Air permeability measures.
  • Air-conditioning equipment and ancillary fittings.
  • Chimneys and flues.
  • Ecological or environmental measures.
  • Electrical.
  • Fire safety.
  • Health and safety compliance measures, including a record of any actions taken, for instance if a hazardous substance has been discovered.
  • Heating (gas, oil, heat pumps, solar, etc.).
  • Insulation, including thermal, acoustic and fire-rated.
  • Painting or plastering which provides fire protection.
  • Plumbing.
  • Renewable energy installations.
  • SAPs calculations (NI) or DEAP calculations (ROI). As-designed and as-built results.
  • Scaffold erection.
  • Structural steelwork erection.
  • Sustainable drainage systems (SUDs) including paving, base layers, percolation trenches, attenuation systems, filters, etc.
  • Timber frame structures.
  • Ventilation and air quality systems.

Certification of products and materials

Certificates or other approved documentary evidence should be retained for compliance and quality of products and materials such as:

  • Acoustic products.
  • Board products such as plasterboards, plywood, composite timber or PVC panels, decking.
  • Cladding to walls and roofs.
  • Concrete products including bricks, blocks, chimneys, lintels, beams, precast retaining walls tanks, and floor slabs.
  • Concrete reinforcement.
  • Conservation and environmental protection products and materials.
  • Electrical and security products.
  • Enabling equipment including grab rails, electrical controls, door controls, etc.
  • Fascias, barge-boards and soffits.
  • Fire safety products such as intumescent paint, sealants, boards, doors, windows, glazing, decking, roof or wall cladding, plasterboard, insulation, fire stops, controls.
  • Fire, smoke, heat, flame and gas detection and alarm systems.
  • Flashings, damp-proof courses, cavity trays, membranes.
  • Flat roof membranes and underlays.
  • Floor and wall tiling and timber flooring products, including decking.
  • Fuel storage tanks, pipes, valves and controls.
  • Gates, barriers, guarding, shutters and their controls.
  • Glass blocks, floors or stairs.
  • Hardcore or other fill material, sand and gravel.
  • Health and safety, including scaffolding, fall arrest systems, etc.
  • Heating, cooling and ventilation appliances and products.
  • Insulation products. Thermal, acoustic and fire-rated.
  • Kitchen fixtures and fittings.
  • Lifts and access systems.
  • Mechanical fixings such as ties, straps, braces, bolted assemblies.
  • Non-structural pre-cast concrete and masonry products.
  • Paints, sealants, expansion joint fillers, air-tightness tapes and adhesives.
  • Power operated doors and gates.
  • Pre-mixed concrete, mortar, plaster and render.
  • Preservatives, including related processes such as vacuum or pressure treatment.
  • Radon barriers and associated fittings.
  • Sanitary fixtures and fittings
  • Self-levelling screeds, expanded clay or foam glass aggregates, limecrete or hempcrete.
  • Septic tank or package sewage treatment plant, manholes, inspection chambers and all foul and surface water drainage products, water treatment systems.
  • Slates, tiles, cladding and associated fittings.
  • Stairs, handrails and balustrades.
  • Structural steelwork components, e.g. steel grades and welding, columns, beams, joints, ties, straps, anchors, nuts and bolts and other fasteners.
  • Structural timber products such as prefabricated beams, engineered timber, roof trusses and space joists.
  • Sustainable drainage (SUDs) paving, base layers, attenuation systems, filters, etc. • Sustainable timber products compliance with FSC or PEFC regulations.
  • Timber prefabricated beams.
  • Timberframe (prefabricated) components.
  • Ventilation systems including air filtration products.
  • Wall lining products. • Water filtration, treatment and storage systems.
  • Windows, doors, roof lights, glazing units and canopies.

Retrospective records

What if your project file has missing information? This often happens and is usually down to neglecting to chase up documentation whenever the products or materials arrive on site or when a process is completed.

Some things are easy to miss, but it takes a lot more time to gather your certification after the event. If you have time to chase it all up and know what to look for, then that’s usually the best course of action.

Contractors all know that it is in their best interests to complete their work by giving you all the paperwork which may reasonably be requested. Some might baulk at providing information which is usually not requested and some may not have the correct details to hand.

Having said that, most subcontractors are very good at certification, as they will (or should) belong to a trade organisation which imposes a code of conduct and they know that their reputation depends on providing the level of service expected of them.

Suppliers such as general builders’ merchants, may prove to be a bit more difficult. Rather than chasing a supplier for days or weeks, it may be faster to get it yourself. Your research for those items will therefore consist of checking manufacturers’ websites for the relevant information, requesting it if it’s not available for download and comparing their written specification with (a) what was specified and approved on the contract documentation; and (b) with what was actually used.

You might have to repeat the process more than once until you have the correct evidence. In the case of an item being provided which does not meet the required standards of quality or performance, you might need to have it replaced.

Your designer should be able to help you with some of the information, but if you simply give them a list of things to collect for you, expect to pay for the service. It is impossible to estimate costs for these sort of tasks until the finish line is reached, but if it’s an extreme case of someone having to retrieve all the required information for you, think about the time it might take and expect a bill for thousands, not hundreds, of pounds or euros. The job of record keeping is always easier if done at the time, in easily manageable stages.